Steering Wheel

[TRUCKMAN]

Few Questions/Help needed. Have been given a momo wheel with a Surf boss/adaptor kit and wanted to know -

How to fit it?

As its approx 35% smaller in Diameter than the Toyota one what are the good and bad things about it if any?

Thanks in Advance Guys

[hiroler]

remove the current wheel 2 screws on the back to remove the cover and a big nut in the middle leave it on a little and give the wheel a good tug!!! should cole loose then just re fit the new one using same nut. re fit the horn and your done.

[Apache]

Good things -

1) Look posh
2) Nice on the road

Bad things -

1) Less precise control / harder work offroad
2) Might make you look a bit of a Barry

[Ava_Banana]

Another good thing:

....makes it easier to drive while wearing handcuffs

[Diezel Weazel]

remove the current wheel 2 screws on the back to remove the cover and a big nut in the middle leave it on a little and give the wheel a good tug!!! should cole loose then just re fit the new one using same nut. re fit the horn and your done.

Every thing he said n if it don't budge make a flat brace with two holes, wind 2 bolts in forcing the steering wheel off (don't forget to leave the steering nut on) or you'll end up with a black eye !!!
Good Luck

There's always a Payback .... Don't know where n don't know when tho !!!!

[TRUCKMAN]

Thanks for the help guys - job done