Front Diff Breather - 3rd Gen

[Ava_Banana]

Hi all,

performed a search but to no avail (the other posts were similar ones asking if anyone had found what I am looking for).

Put a rear diff breather on this pm......well, I routed the pipe from back to front up into the engine bay.....the plug didn't arrive from the ebay seller so I'll have to do that during the week.

...couldn't find one on the front diff.....any clues as to where I would find the breather for the front diff on a 3rd gen surf?

Thanks

[Ava_Banana]

...bumped for the day peeps....

[nero279]

41110V in this diagram - http://www.toyodiy.com/parts/p_J_199...APVT_4301.html

looks to be on the top (guess you'd already figured that bit?), towards the front and slightly to the o/s of centre.

I know on the second gen there's a flat bit in a similar place, where the breather screws into, it's quite tight between the diff and sump to swap it over, but can be done. Easier with a swivel fitting.

[Ava_Banana]

Thanks Nero.......finding that will keep me busy....