Knz185 Head And Cam Torque Settings

[leesurfssrg]

Hi can anybody help me I need the torque settings for the head and cam on my knz185 cheers Lee

[bosbax]

Hi can anybody help me I need the torque settings for the head and cam on my knz185 cheers Lee

It's recommended that you use new headbolts,start with an initial torque of 39nm on the center 2 opposite bolts then repeat for all the rest working diagonally outwards left then right.When completed tighten a further 90degree turn on each bolt in sequence,then repeat tighten a further 90 degree turn on each bolt in sequence.The bearing cap bolts should be tightened to 19nm in sequence.Hope this helps.Richie.

[Diezel Weazel]

Try this
http://www.hiluxsurf.co.uk/forums/sh...ghlight=torque
Good Luck

There's always a Payback .... But don't expect a warning !!!!