So, So, Sorry But This Is Another Tyre Question!

[RodLeach]

Whohoo!!!

I'm keeping my eyes open for anything that might be any use mate!

You can still fit 33's to those rims if you wanted. It wont be a problem.

[Scorpion]

I dunno..


Im thinking 8" myself.

Congratulations Rod, you are the winner of todays 'Guess The Rim Size' competition!



Your prize is to keep on looking for a set of 33" tyres and wheels for me!

[RodLeach]

Looking at the lack of sidewall bulge, and that the tread width of the tyre is practically flush with the rim of the wheel, I would put money on those wheels being 10" wide.

I dunno..


Im thinking 8" myself.

[BUSHWHACKER]

Just been out to check rim size but can't see any info anywhere on rims. My current tyres are 31x10.5x15 and they don't seem to bulge out too far from the rims so I might be in luck.





Does anyone have an idea of where the rim info may be stamped?

If no info is available is it just a matter of measuring across the rims to find out the width?

Looking at the lack of sidewall bulge, and that the tread width of the tyre is practically flush with the rim of the wheel, I would put money on those wheels being 10" wide.

[stormforce]

its feeling bloomin cold down here aswell and i gotta go a strip all the steering componants off the breaker.Lucky the truck is in the garage tho

[Scorpion]

Thanks Richard, I'm just about to put the winter woolies on to go out and check, bluddy freezing up here!

[stormforce]

the 3 sets of alloys i got here the rim info is on the inside so it may be easier to take a wheel off and have a look.

[Scorpion]

Just been out to check rim size but can't see any info anywhere on rims. My current tyres are 31x10.5x15 and they don't seem to bulge out too far from the rims so I might be in luck.





Does anyone have an idea of where the rim info may be stamped?

If no info is available is it just a matter of measuring across the rims to find out the width?

[Scorpion]

Anyluck with Keef?!

I doubt yours are 10" mate from what i've seen.

8" are absolutly fine! Dont worry about running them on 8's. I'd be bl**dy shocked if anything happened.

Boyo ran 12.50's on a set of 7" wide rims an as far as im aware they never popped a bead .

Keef knows I'm interested Rod and has told me he will let me know when they come up for sale in mid November. I'm just exploring all the options mate in case things don't work out.

[POPEYE]

My dear Watson, Listen up. That wheel spacer has holes with a PCD of 137mm. That means its got an o.d of not much over 150mm or 6". I therefore deduce that the tile its sitting on is a standard 12" tile. Looking at the wheel against the tile I,d have to say that, provided no trick photography has taken place, that My dear Watson is a 10" wheel. Its elementary.

Elementry my dear Bogus except the "tile" is a patio slab (bout 18" i fink) but yes i'm sure their 10" rims,

Vince! ti dont go fast enough to cause air flow

BD, could'nt dissapoint you

Bibs! yup twin pipes but nowt on either end (yet)

Rod, i'll get the stickers and check but yup they look like 10"

Jim! maybe i should flogg the truck and get a horse

[Scorpion]

Ian, if those aren't 10" rims I'll eat hay with a horse!

[BUSHWHACKER]

Any help Rod, as i said i'll check the stickers tomorrow and let you know, pretty sure they were ten tho

Dammit, theres those wheels again!!



Ian, just looking at your hood scoop and bug deflector on the bonnet, It looks as though the intercooler is not getting the full force of air 'cos it's being deflected over it.


Just a thought.

[Bogus]

My dear Watson, Listen up. That wheel spacer has holes with a PCD of 137mm. That means its got an o.d of not much over 150mm or 6". I therefore deduce that the tile its sitting on is a standard 12" tile. Looking at the wheel against the tile I,d have to say that, provided no trick photography has taken place, that My dear Watson is a 10" wheel. Its elementary.

Bogus

[Bibs]

Any help Rod, as i said i'll check the stickers tomorrow and let you know, pretty sure they were ten tho

Knew I'd seen twin pipes somewhere

[POPEYE]

Any help Rod, as i said i'll check the stickers tomorrow and let you know, pretty sure they were ten tho