S/Steel plate???????

[POPEYE]

Anyone know anyone who may know someone that can get/obtain/come by stainless plate? about 4-6 odd mm thickness (arc-weldable) not sure on size but lets say TJM bumper parts size roughly, 8X4, decieded if i can get the metal i'm going to make one and would prefer s/s so i can polish it, i can make the winch tray out of thickish mild steel but the bumper has to look the b0lloks,

[surfenstein]

Anyone know anyone who may know someone that can get/obtain/come by stainless plate? about 4-6 odd mm thickness (arc-weldable) not sure on size but lets say TJM bumper parts size roughly, 8X4, decieded if i can get the metal i'm going to make one and would prefer s/s so i can polish it, i can make the winch tray out of thickish mild steel but the bumper has to look the b0lloks,

so you want an 8x4 sheet of 4mm s/s ? whats your bank balance like.its gonna be around £250 .

[Webbo]

I can get it Ian but like Stein says its gunna be pricey. Also 4 to 6mm is gunna be a right pain to cut and fold yourself, if you new the dimensions ect as you know I can get laser cutting done for you but its pricey.
I can see your point though fabbed up polished stainless is the way to go it looks the dogs dangleys.

[POPEYE]

Cheer's guys!! money's not a problem, i aint got none

at the moment it's just a thought, in it's infancy, in fact it's still in the womb,
i'm thinking along the lines of stuff in the skip but i guess thats too much to ask, someone chucking out decent size bits so i'll have to start saveing
i was thinking of doing it in flat sections Dave, with only curves on the return at each end (wrapround), and all arc welded, anyway mate i can do some designs and see what looks ok, quite fancy haveing a go at this,
i'll need to check roughly how big a tray i'll need for the winch (if i get one, and before the useual crew spout"you'll never need one") i'd like to fit one just incase and for the b0lloks of it, also getting a bit chocka with the front look on mine,
give you a shout when i have some dosh Dave if thats ok

[POPEYE]

Forgot Dave! have you started/done you 3" exhaust yet? mine's doing ok, certainly made a difference, only prob i have to sort out is a loud knocking where the tail pipes hitting the sill bottom edge, only happens at certain idleing speed but other than that its fine,
i have a couple of those flanges left over if you need em.

[kiowa]

i have two sheets of ally check plate there about 5ft by 4ft each and 3mm thick if thats of intrest to you

[BUSHWHACKER]

i have two sheets of ally check plate there about 5ft by 4ft each and 3mm thick if thats of intrest to you

Can I have first dibs if he don't want them?

[POPEYE]

Thanks all the same but def looking for s/steel

[BUSHWHACKER]

Ooh! Ooh! Ooh!

[darkdezigns]

Ooh! Ooh! Ooh!

wish id seen this first

[BUSHWHACKER]

I wish Matthew would say something.

[kiowa]

you can have a sheet if you want it matey it mite even be stainlees steel

[darkdezigns]

you can have a sheet if you want it matey it mite even be stainlees steel

can i have the other sheet?pretty plz

[darkdezigns]

pretty pretty plz

[POPEYE]

you can have a sheet if you want it matey it mite even be stainlees steel

If it IS s/s i would be interested, have a check and let me know, then i'll see if i can rob someone