Any ideas? suggestions?

[blackpoolsparks]

OK here are the pics.
Had a look today and theres nothing obvious that looks like its bent. Both of the bumper brackets seem fine. I think perhaps its ever so slight, as the rear bumper has only moved up slightly, however as the quarters are attached and are a long way away the angle is magnified at the ends thus:

the only thing I can think to do is to place some washers between the bumper bracket and the frame at the bolt (the one nearer to the rear) , as there are two fastening bolts on each bracket, front and rear and to try and level the angle

Any suggestions, ideas???
http://www.hiluxsurf.co.uk/forums/at...5&d=1214145283
http://www.hiluxsurf.co.uk/forums/at...4&d=1214145263

[nero279]

looks to me as if the whole bumper may have been pushed over to the right a bit, would be checking the two v shaped bracket's that hold the centre section to the body, they may give a better idea of what's actually moved where

[Cant Get Right]

OK here are the pics.
Had a look today and theres nothing obvious that looks like its bent. Both of the bumper brackets seem fine. I think perhaps its ever so slight, as the rear bumper has only moved up slightly, however as the quarters are attached and are a long way away the angle is magnified at the ends thus:

the only thing I can think to do is to place some washers between the bumper bracket and the frame at the bolt (the one nearer to the rear) , as there are two fastening bolts on each bracket, front and rear and to try and level the angle

Any suggestions, ideas???
http://www.hiluxsurf.co.uk/forums/at...5&d=1214145283
http://www.hiluxsurf.co.uk/forums/at...4&d=1214145263

Looks quite funny to be honest cant you just pull it up and shove a bolt in

[blackpoolsparks]

looks to me as if the whole bumper may have been pushed over to the right a bit, would be checking the two v shaped bracket's that hold the centre section to the body, they may give a better idea of what's actually moved where

had a look and no signs of movement or bending. The pics cant really show it well but both sides are the same, however more pronounced on near side. thats why im thinking its a slight bend at the rear (at the 2 bracket mounts) which is exagerrated at the end of the quarters.

[KERRSURF]

cut it off, you don't need bumpers.