Ball Joint Nuts

[SurfingNow]

anyone know where you can buy castle nuts for the steering ball joints?
or what size thread they are?
i seems to have buggered one so it wont go back on

Thanks yall

[stormforce]

anyone know where you can buy castle nuts for the steering ball joints?
or what size thread they are?
i seems to have buggered one so it wont go back on

Thanks yall

send me a pm and i'll post one off from the breaker

[roylittle0]

From what i can see there are two different types, the ones for the track rods are a M14 fine thread and the one for the idler arm is a M12 fine.

If Stormforce hasn't got the ones you want then PM me and ill sort you out a couple of new ones and split pins

[SurfingNow]

send me a pm and i'll post one off from the breaker

Stormforce you have EMAIL

don't no bout different sizes but i no mine of trackrod end has 1.5 pitch thread
and i used a 19mm spanner to undo it

[roylittle0]

Toyota standard automotive threads are
M12 x 1.25 17mm spanner (Nut), 14mm spanner (Bolt)
M14 x 1.50 19mm spanner (Nut), 17mm spanner (Bolt)

[NiftyNev]

Tie Rod ball joint inner and outer M14 X 1.5

Ball Joint upper and lower M16 X 1.5

Not sure of the Idler Arm and Pitman arm joint thread size.

Nev

[stormforce]

Stormforce you have EMAIL

don't no bout different sizes but i no mine of trackrod end has 1.5 pitch thread
and i used a 19mm spanner to undo it

back at you and in the post on monday for you

[SurfingNow]

back at you and in the post on monday for you

Thank u very much stormforce as its very much needed at the mo as me
Missis had rta in her car this mornin so mine will be the only one on the road,
The missis ir peed tho she only had the car last wednesday 04reg 206 hdi and
Dam it was quick wiv only 16400miles on the clock