Saggy rear end!!

[martyrsvr]

My rear end is sagging ! ( the truck )
Id like to do a 2" lift so should i start with new standard springs then put spacers under them , or do i go for taller springs ??
was looking at second hand standard springs but cant be sure they aint sagging too

[Apache]

Just go for bigger springs. Much cheaper than standard springs + spacer.

[plumb bob]

If you get Land Cruiser rear springs, you'll get about 3" of lift, and they'll be stiffer too, oh and not cost an arm and a leg either.

[KERRSURF]

£44 + vat from milner off road. Just ordered Yoshie some.

[martyrsvr]

£44 + vat from milner off road. Just ordered Yoshie some.

Can i do a straight swap or need to change socks or anything?

[KERRSURF]

Str8 swap I think. They don't seat properly in suf chassis but others use em and don't have problems.

I'll find the link.

[KERRSURF]

rear springs on this page.
http://www.milneroffroad.com/categor...?cID=11455&p=2

[plumb bob]

Can i do a straight swap or need to change socks or anything?

I wouldnt change socks until job is done, in case you get grease on them!

[Apache]

Can i do a straight swap or need to change socks or anything?

I change mine on a daily basis. People will like you better if you change yours too.

[martyrsvr]

I wouldnt change socks until job is done, in case you get grease on them!

lololol
just noticed that maybe ill where black socks so the grease wont show up

[KERRSURF]

Ah see, I know what Marty meant, he meant do I need to wear my mechanics socks because the job has a certain level of technical difficulty or could I just wear my everyday socks.

[martyrsvr]

rear springs on this page.
http://www.milneroffroad.com/categor...?cID=11455&p=2

Great thanks matey ill get them ordered next week, then i can adjust the front up a tad
ready for the clog

[drunkmonkeyboy]

When i got my truck it all ready had a 2 inch spring lift on the original shocks. they were pretty battered and needed replacing so got some +2 pro-comp es9000 and they are much better. Your original shocks should be ok until you have saved for some new extended ones, just don't leave it too long!

[E500TAT]

Milner do some springs that are something like 25% stronger that go with a standard set up at £44