If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Jons gonna weld him a large 150l oil container in the back so he never runs out again
Ooooh you can be sooooo cruel
I make ONE little mistake ??? anyway I did not run out of oil,infact it was the opposite and anyway I only put in a little too much (about 1.5 lts)
Ooooh you can be sooooo cruel
I make ONE little mistake ??? anyway I did not run out of oil,infact it was the opposite and anyway I only put in a little too much (about 1.5 lts)
What ya saying then Richard... Koi's over estimated n added a zero too many !!
There's always a Payback .... Ya just never see it Comin !!!!
anyway I did not run out of oil,infact it was the opposite and anyway I only put in a little too much (about 1.5 lts)
Some of it is still on my drive . Goes well with the trans fluid from the Chevy transmission that poured out all over Jon's trailer and then onto the drive and then garage floor
Rick...Member of 1st Gen club. ONE LIFE ... GET ONE !!
Some of it is still on my drive . Goes well with the trans fluid from the Chevy transmission that poured out all over Jon's trailer and then onto the drive and then garage floor
The story so far.. After much thought I am at last trying to put a 3ltr engine into my 2.4 1st gen.So it was off to castle Jotto (he's my Hero) to start the project.Its gonna take a couple of weekends and a lot of head scratching plus buckets of tea,but with Jons super powers and some "I dont know? try it" from me things are moving along nicely,(well the old engine's out and the new engine and gearbox are sort of matched) so its back to the home of my Hero (did I mention his name is JOTTO ) next weekend to carry on.
Nice one If I had thought about it in the earlier day's maybe I could have swapped for the price of the engine rebuild and new head. Still the old girls ticking fine now.
Keep posting pictures of the progress I love to watch a good project take shape.
Comment