Arrived !!

[joker??]

received my swivel eyes @ battery isolater today
really seem a nice bit of kit now just got to enlarge a 20mm hole to a 36mm
any ideas ???? apart from step drill bit its got to go through a 5-6 mm metal plate

[KERRSURF]

Local coachworks will have a plasma cutter or large holesaw.

[KERRSURF]

I would just use a holesaw and some metal cutting lube.

[joker??]

thought of using a holesaw but i have a 20mm hole allready

[darkdezigns]

received my swivel eyes @ battery isolater today
really seem a nice bit of kit now just got to enlarge a 20mm hole to a 36mm
any ideas ???? apart from step drill bit its got to go through a 5-6 mm metal plate

wot u drillin thru?the d shackle???

[plumb bob]

You could clamp a thin plate over the existing hole, and then use the holesaw to drill a "new" hole through both .

[joker??]

wot u drillin thru?the d shackle???

no bumper


might be a way of doing it bob but its gonna be a bugga to keep it clamped and lined up for drilling

[gwh200]

no bumper


might be a way of doing it bob but its gonna be a bugga to keep it clamped and lined up for drilling

cant u use a cone drill dave ?,

each cutting edge cuts progressively bigger

[Antshiel]

Whats it for?

[joker??]

cant u use a cone drill dave ?,

each cutting edge cuts progressively bigger

about £50 for one that goes upto 36mm for one that will go through 5mm plate

[joker??]

Whats it for?

to go through bumper recovery point

[nero279]

http://www.toolbaydirect.co.uk/produ...2021&catid=246

http://www.transtools.co.uk/store/pr...20mm-36mm.html

any good?

[gwh200]

does the tjm one have any recovery points ?

[joker??]

if they will go through 5mm plate ian they will be ideal

big question is will they ????

[joker??]

does the tjm one have any recovery points ?

might have some just under bumper front ask rod