winch !!!

[joker??]

just wired up me winch got the ferking thing put in at 4x4 rus when they fitted bumper , only found out last night that i had to run neg to the underside of winch winch can only come out if i take the bumper off so spent all morning trying to bolt neg to winch , finally managed it by bending spanner and cutting the wire connect to make it into a u fixing , lost a 14 mm spanner in the depths of the bumper lol
anyway all done now and working ok

ps if your going to 4x4rus for a winch bumper either fit it yourself [well two or three of you ] or make sure you can get to all the wiring


cheers neil for helping me out with instructions

[sledge]

just wired up me winch got the ferking thing put in at 4x4 rus when they fitted bumper , only found out last night that i had to run neg to the underside of winch winch can only come out if i take the bumper off so spent all morning trying to bolt neg to winch , finally managed it by bending spanner and cutting the wire connect to make it into a u fixing , lost a 14 mm spanner in the depths of the bumper lol
anyway all done now and working ok

ps if your going to 4x4rus for a winch bumper either fit it yourself [well two or three of you ] or make sure you can get to all the wiring


cheers neil for helping me out with instructions

no worries mate looking good. now go find some things to pull

[joker??]

no worries mate looking good. now go find some things to pull

chickens oops wrong thread

hehe hope it aint me that gets stuck though lol
cheers mate it was much appreciated

[sledge]

chickens oops wrong thread

hehe hope it aint me that gets stuck though lol
cheers mate it was much appreciated

at least if ya do get stuck you can pull yourself out

[smiffy]

I'll make a note of that for my design specification

[joker??]

I'll make a note of that for my design specification

lol

[surfenstein]

looking good dave i hope yer welding holds up mate.

[joker??]

looking good dave i hope yer welding holds up mate.

you know my welding is A1 have to pm you about my xmas prezzie lol
gwh is BI curious

[gwh200]

you know my welding is A1 have to pm you about my xmas prezzie lol
gwh is curious

[surfenstein]

what BI CURIOUS.

[Diezel Weazel]

just wired up me winch got the ferking thing put in at 4x4 rus when they fitted bumper , only found out last night that i had to run neg to the underside of winch winch can only come out if i take the bumper off so spent all morning trying to bolt neg to winch , finally managed it by bending spanner and cutting the wire connect to make it into a u fixing , lost a 14 mm spanner in the depths of the bumper lol
anyway all done now and working ok

ps if your going to 4x4rus for a winch bumper either fit it yourself [well two or three of you ] or make sure you can get to all the wiring


cheers neil for helping me out with instructions

Looking good Dave !!
Just beware n watchout for Captain Chaos, as Neil will verify he's liable to breck ya clutch ! or ya Winch

There's always a Payback .... Ya just won't see it Comin !!!!

[MrE]

Looks good Now you wont have to Hum 'n' are, before diving into a damp hole

Mark.......

[captain_chaos]

Looking good Dave !!
Just beware n watchout for Captain Chaos, as Neil will verify he's liable to breck ya clutch ! or ya Winch

There's always a Payback .... Ya just won't see it Comin !!!!

he he, I'll probably just reverse into it instead lol

[joker??]

Looks good Now you wont have to Hum 'n' are, before diving into a damp hole

Mark.......

whos been talking about me and the chickens

jason dont park near me

[captain_chaos]

whos been talking about me and the chickens

jason dont park near me

he he, if you've seen the post from surfenstein then you'll see what's going onto the back of my surf. Won't be good for anything I reverse into, or hits me in the back