This any good?

[Apache]

http://cgi.ebay.co.uk/Hilux-Pickup-S...QQcmdZViewItem

What about for IFS Surfs?

[Woodzie]

HOW MUCH?????????


They are taking the P!55

[stormforce]

http://cgi.ebay.co.uk/Hilux-Pickup-S...QQcmdZViewItem

What about for IFS Surfs?

for what he's charging for that you can but the unions and pipe a hell of alot cheaper as he is only selling for the rear so you will still have the front to do.

[stormforce]

HOW MUCH?????????


They are taking the P!55

yea but i bet he's an emmet

[Apache]

for what he's charging for that you can but the unions and pipe a hell of alot cheaper as he is only selling for the rear so you will still have the front to do.

Just thought it was convenient - that is for both ends innit?

Where can I get the unions, cos the pipe's no probs for me?

[stormforce]

Just thought it was convenient - that is for both ends innit?

Where can I get the unions, cos the pipe's no probs for me?

you can get the unions from Toyota £3.75 +Vat each i have got the part number here somewhere i'll find it and post it up

Edit
90404-51319

[sledge]

is that both of them as in one straight and the other 90 bend?

[stormforce]

is that both of them as in one straight and the other 90 bend?

they only had straight on their system

[Woodzie]

a Strait will do on the back you need the elbow for the front. there is very little room on the front diff.

Then you can tee them in the engine bay and put on a one way valve

[nero279]

I've got the tee piece on the front diff, 4mm pipe and 3/8" bsp -4mm push fittings. it's actually a LR wading kit, but you should be able to get it from a plumbers merchant or hose supplier.

If you gonna pay 20 quid let me know and i'll have his 100%+ profit margin

[stormforce]

a Strait will do on the back you need the elbow for the front. there is very little room on the front diff.

Then you can tee them in the engine bay and put on a one way valve

if the diff is lowered then a straight will go on won't it or not.Only so i know whether to cancel 1 straight that is on order

[sledge]

if the diff is lowered then a straight will go on won't it or not.Only so i know whether to cancel 1 straight that is on order

this is where i got my info from
http://www.toyotasurf.asn.au/techsite/diffbreathers.htm

[stormforce]

this is where i got my info from
http://www.toyotasurf.asn.au/techsite/diffbreathers.htm

thanks Sledge.when i ordered the unions my mind went totaly blank and couldn't think when and where i had seen the threads etc about them so thought stuff it and took the bull by the horns

[Apache]

I've got the tee piece on the front diff, 4mm pipe and 3/8" bsp -4mm push fittings. it's actually a LR wading kit, but you should be able to get it from a plumbers merchant or hose supplier.

If you gonna pay 20 quid let me know and i'll have his 100%+ profit margin

100% profit margin isn't unreasonable.

Vicki makes around 75% to 150% usually. You have to remember there's charges and then tax which will knock it back down to 35% to 100%.

To buy the bits from Toyota, I need to actually drive to our nearest dealer which will cost me a tenner, and take an hour or two out of my life to do it. Basically I end giving the money to Toyota, Shell and wherever I buy my pipe from.

However, if someone els wants to buy the bits for me...

[sledge]

no worry at least you know now lol