Poly Lift Rod Supplies

[The Hornet]

Looks like some people have been suffering a posting famine

Right, back to business. Which product, in the lik, would I need to do a 2" lift. I can only work in mm's. Can anyone advise please?

http://search.ebay.co.uk/_W0QQfgtpZ1...kpreneurethane

Thanks men

Simon

[sledge]

vatchman is the one you want to ask or bushwacker

[BUSHWHACKER]

Somebody call??


http://cgi.ebay.co.uk/3-4-ID-X-2-OD-...QQcmdZViewItem

[The Hornet]

Thanks for that. Is this ok for my truck?

[BUSHWHACKER]

Thanks for that. Is this ok for my truck?

Reading the specs. I would say, Yes.......
K-950A RED
95A DURO
High tensile strength and high load-bearing capacity. Good tear strength, cut resistance, and abrasion resistance. Maximum recommended deflection: 25%

You'll need ten 50mm pieces for a 2" (50mm) body lift, plus some 12mm bolts.

[The Hornet]

Bushwhacker, I'd read on the Aussie site that the bolts were 10mm. Why have you said 12mm.

Thanks

Simon

[jotto]

The bolts are 10mm (you could use 12mm if you wanted) and the hole in the spacer should ideally be no bigger than 11mm so there is no room for movement.

[TonyN]

The bolts are 10mm (you could use 12mm if you wanted) and the hole in the spacer should ideally be no bigger than 11mm so there is no room for movement.

Yeah, I was gonna say that, the hole in the middle of that stuff is to big.

[TonyN]

vatchman is the one you want to ask or bushwacker

or Jotto/Danno who makes them now, or me who has made plenty in the past 10 years.



:feeling left out smilie:

[sledge]

or Jotto/Danno who makes them now, or me who has made plenty in the past 10 years.



:feeling left out smilie:

ahh i sooooooo sorry i forgot you guys

[surfenstein]

or Jotto/Danno who makes them now, or me who has made plenty in the past 10 years.



:feeling left out smilie:

if it makes you feel better tony .its no good asking me coz i know nuffin.

[The Hornet]

So is this stuff ok and I just need acquire 12mm bolts?

Thanks

[TonyN]

So is this stuff ok and I just need acquire 12mm bolts?

Thanks

But then you'd need to drill out all the chassis and body holes, and also all the washers and rubber bushes that locate everthing.

I'd get solid and drill out the centers the right size. 2" dia Nylon, acetal, aluminium all works.

Or just wait till Jotto gets his finger out......

[Vagrant No2]

Or just wait till Jotto gets his finger out......

I know where its been

[Gamedawn]

I know where its been

Curse you - keyboard and screen now need beer wiping off them