If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Another quickie. Is two grunts tight about right for the bolts?
Had to file some of the corner off the plate on the towbar so the stabiliser thingy would sit on properly. The people who fitted it first time around must have had it well skewed to get it to fit.
Another quickie. Is two grunts tight about right for the bolts?
Had to file some of the corner off the plate on the towbar so the stabiliser thingy would sit on properly. The people who fitted it first time around must have had it well skewed to get it to fit.
id go for at least three or four grunts,just make sure you dont.
Just out of curiosity. The bracket for the stabiliser bar is the rearmost piece fitted to the towbar mounting plate. The shape of it and the casting pushes it out a couple of mm from the bottom of the mounting plate. Is that okay as is, or would it be better served with a spacer block between it and the mounting plate?
Comment