advice please

[johnd]

i got a saggy but and want to fix it .
20% stronger or 2" lift .
plus best place to buy ?
wot do you think.
john

[Woodzie]

i got a saggy but and want to fix it .
20% stronger or 2" lift .
plus best place to buy ?
wot do you think.
john

If you carry a load 20% stronger
The 2" lift ones ore ok but will sink with alot of weight in the back

[MattF]

[stormforce]

i got a saggy but and want to fix it .
20% stronger or 2" lift .
plus best place to buy ?
wot do you think.
john

it depends on what you wanna spend about £60 all in for 20% stronger springs from milners
or about £75 + p&p + vat from roughtrax but you will get only 1.5" of lift with those springs

[johnd]

lots of stuff in the back but nothing to bad plus i think i would like a lift.
john

[Woodzie]

lots of stuff in the back but nothing to bad plus i think i would like a lift.
john

Fit coil spacers and +2"shocks

[stormforce]

lots of stuff in the back but nothing to bad plus i think i would like a lift.
john

or go that little bit more and go for the L/cruiser springs and get 3" of lift but you will need a few other bits aswell

[johnd]

or go that little bit more and go for the L/cruiser springs and get 3" of lift but you will need a few other bits aswell

what bit is that ?
john

[MattF]

what bit is that ?
john

Panhard rod drop bracket and brake valve bracket. Bushwhacker sells 'em.

[stormforce]

what bit is that ?
john

panhard drop bracket which you could get from Bushy and +2 or +3" shocks on the rear

[johnd]

panhard drop bracket which you could get from Bushy and +2 or +3" shocks on the rear

if went down that road would i get the front up on the toursion bars . ?
and would that be the end of the hard /soft option on the suspention ?
john

[stormforce]

if went down that road would i get the front up on the toursion bars . ?
and would that be the end of the hard /soft option on the suspention ?
john

you wont have the hard soft suspension if you went this route and you could get 1.5" on the torsion bars or get diff spacers from Jotto and you can get 2" on the torsion bars.this is mine with 5" lift, 2" of that is bodylift

[Antshiel]

if went down that road would i get the front up on the toursion bars . ?
and would that be the end of the hard /soft option on the suspention ?
john

In a word "no" only about 1.5" maximum.

[stormforce]

this is the stuff i got for my lifts.I also got 2" on the torsion bars with using diff spacers.
panhard drop bracket = £47
diff spacers = £40
front +2" es3000 shocks x 2 and rear +3" es3000 shocks = £147
L/C springs £60ish
extended braided brake hoses £65ish
2" body lift kit = £70-£75
i think this lot comes out at £435 ish but i had something else but cant think what it was now.
I am also after wanting some ball joint spacers aswell for the front but they are optional to the individual

[johnd]

you wont have the hard soft suspension if you went this route and you could get 1.5" on the torsion bars or get diff spacers from Jotto and you can get 2" on the torsion bars.this is mine with 5" lift, 2" of that is bodylift

looks like mine but taler , i just painted the bottom black and the front bumper , just the rear one to go .
same decal aswell but want to take it of but the n/s/f/ door has been painted with the decal masked out so i will have to paint the door aswell .
john