yobit eobot.com

Announcement

Collapse
No announcement yet.

Arrrgghhh -rusty shocks!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Arrrgghhh -rusty shocks!!

    Noticed this morning the rods on my newly installed ES9000's have started to rust!
    Is this normal??
    anybody else got rust on theirs?
    won't the rust damage the seals when shocker retracts?
    Everyone thinks I'm paranoid!!

  • #2
    be checking mine tomorrow

    how long you had them on??
    Only Toyota can get you out of shite

    Comment


    • #3
      mine have also started to rust and only been on a couple of months
      https://www.facebook.com/groups/henpals/

      Comment


      • #4
        Yep, I fitted some to my old 2.4 and they started to rust in matter of mounths - I think the paint coating on them is pretty cr@p

        Comment


        • #5
          Originally posted by paulc
          Yep, I fitted some to my old 2.4 and they started to rust in matter of mounths - I think the paint coating on them is pretty cr@p
          How long ....................
          ...............The es3000's that i just took off my truck were fine
          www.daemon4x4.org

          Comment


          • #6
            The white paint is only Powder Coated so its advisable to paint them as TONYN has previously mentioned
            (\__/)
            (='.'=) SQUIRREL MUNCHER GRRRRRRR
            (")_(")

            Comment


            • #7
              The painted body is OK - it's the shiny silver metal rod that slides in and out bit thats rusting. been on for 2-3 months!!!.
              I'm just worried the rusty bit will cause damage to the seals when it goes inside body during bump driving - and ultimately fcuking the shock!!
              Everyone thinks I'm paranoid!!

              Comment


              • #8
                I'd call PROCOMP & complain
                (\__/)
                (='.'=) SQUIRREL MUNCHER GRRRRRRR
                (")_(")

                Comment


                • #9
                  The rods are generally OK, do you have boots on them? Only ones I've got that are going rusty on the rods havn't been used in 3 years and don't have boots!

                  If the boots are sealed it holds moisture in, make sure the drain holes are free.

                  Normally you'll not get any rust on the bit of rod that slides in and out, even on a $$$$py shock thats used regularly.
                  4x4toys.co.uk - Keeping you on and off the road...

                  Comment


                  • #10
                    these bits...

                    Ironically I did not bother with the boots as I thought they would trap moisture and accelarate rusting!!!
                    Everyone thinks I'm paranoid!!

                    Comment


                    • #11
                      I think its cause they don't have any boot on, and the rod that high up never gets rubbed.

                      I'd go nuts over a few speed humps to clean them, then fit a set of gaiters.
                      4x4toys.co.uk - Keeping you on and off the road...

                      Comment


                      • #12
                        Clean then up as best you can using WD40 then smear some thick grease on the tops or fit gaiters.

                        I fitted the genuine shocks to mine when one of the rears went. No problem here, as the whole thing is covered.

                        Comment


                        • #13
                          roughtracks told me that failure to fit boots could void warrentee due to rust, so I paid the extra for the boots, nice yellow ones.( like christopher robin)
                          Rob

                          Still working for the man!

                          Comment


                          • #14
                            I'll give them a polish then find some boots then!
                            thanks to all for your input!
                            off to ebay for boots!
                            Everyone thinks I'm paranoid!!

                            Comment

                            Working...
                            X