1.5" Bodylift

[Andy7160h]

Has Anyone fitted the 1.5" bodylift, i got mine the other day and the bloke i spoke to at Milners said i wont have to alter anything! I find this abit hard to believe.

Need to get as much info as i can by tomorrow night coz thats when its getting done.

Cheers

[stormforce]

Has Anyone fitted the 1.5" bodylift, i got mine the other day and the bloke i spoke to at Milners said i wont have to alter anything! I find this abit hard to believe.

Need to get as much info as i can by tomorrow night coz thats when its getting done.

Cheers

here you go Andy although its for a 2" it will be the same for the 1.5"
http://www.yotasurf-online.co.uk/pub...ead.php?t=4713

[WARRIOR72]

just a quick question... i see the pics/ description is for a manual surf.. is it different for an auto one ie gear selector(s)? cheers

[stormforce]

just a quick question... i see the pics/ description is for a manual surf.. is it different for an auto one ie gear selector(s)? cheers

the only thing you may have to do and that is to make the hole a bit longer where the high/lo selector goes thru the body and also where the steering rack goes thru the bulkhead take the small plate off and you may have to make that hole slightly bigger too

[WARRIOR72]

thanks rich.would you not have to lengthen the actual gear selector from the gearstick to the autobox... all these pictures getting me excited!! (doesnt take much i know!!)
richard(good name sir!)

[stormforce]

thanks rich.would you not have to lengthen the actual gear selector from the gearstick to the autobox... all these pictures getting me excited!! (doesnt take much i know!!)
richard(good name sir!)

i have'nt actually got my 2" done yet but from what others have said no you don't the lever will just be slightly shorter in the cab so it should'nt make a differance.
All the best people are called Richard..........

[Andy7160h]

Better call in some help

[stormforce]

Better call in some help

i was going to be getting mine fitted this w/end.I was going to travel upto Poole and meet up with Boyo and Vatchman to fit it but unfortunately i cant make it but will be doing it in a few weeks time

[long_finger]

i have'nt actually got my 2" done yet but from what others have said no you don't the lever will just be slightly shorter in the cab so it should'nt make a differance.
All the best people are called Richard..........

Madeley and Turpin come to mind.


Cheers.........Johnny

[stormforce]

Madeley and Turpin come to mind.


Cheers.........Johnny

yea and i wish i had their money too..........lol

[dirtydog]

1.5" you dont need to change anything, i dont it on mine and all i lost was steering grommit (keep an eye on it). my lo-range occasionally drops out but thats it.

[The Lovely Boyo]

Has Anyone fitted the 1.5" bodylift,

I fitted the Milners 1.5'' body lift - you don't have to alter anything but....

As Richard said, the transfer box will be tight, although mine worked after a bit of off road persuasion.

I didn't have to alter steering grommet, but you do have to loosen the splines - see this write up - better than the aussie one - http://www.hiluxsurf.co.uk/php_lib/v...at=3&submit=Go

Its on our home page under information - files - technical mods

And do the drivers side first.

Some of the bolts from Milners will be wrong length - you will have to swap around some of the old ones - but you will have enough.

Allow 3 - 4 hours - and its easier with help.

[Apache]

Think Tony was saying loosen the splines under the dash as they are longer.

I'm possibly getting the 2" lift on this weekend with the help of Bushwhacker so I'm sure one of us will left you know how it goes!

[stormforce]

Think Tony was saying loosen the splines under the dash as they are longer.

I'm possibly getting the 2" lift on this weekend with the help of Bushwhacker so I'm sure one of us will left you know how it goes!

Tonyn was saying to me when he was here in Sept about slackening under the dash aswell