If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I fitted two of these a while back, ( copied Codlord) got mine from import solutions www.importsolutions.co.uk. Dont know if the ebay ones are cheaper or not but the service from import solutions was fast. I used the bezel plus the standard lamp which gaves the same nice flush fit.
I was thinking of doing this,and liking things to be even was gonna put two on, i know if you got one it has to be on the offside, but if you fit two can they both be lit? whats the law on this?
I was thinking of doing this,and liking things to be even was gonna put two on, i know if you got one it has to be on the offside, but if you fit two can they both be lit? whats the law on this?
Of course. Nearly all modern vehicles have two, so why not?
I've got two and the truck passes the MOT .
I looked at these but wnated to keep mine factory so went to local s c r a p p y and got 2 from a couple of RAV4's (cost £5.00 for the 2) inc bulbs & holders.
Hardest bit was cutting the holes in the bumper but now well happy with the look and they have the toyota logo as well.
I looked at these but wnated to keep mine factory so went to local s c r a p p y and got 2 from a couple of RAV4's (cost £5.00 for the 2) inc bulbs & holders.
Hardest bit was cutting the holes in the bumper but now well happy with the look and they have the toyota logo as well.
cheers
hawaii
A fiver sounds more like it, the ones from the ebay guy are twenty odd quid each which i think is a bit stiff for a fog lamp, i'll try our local $$$$$ers,
Cheers
Mine were £2.99 each from a motor spares shop. There's no fancy surround with them though as they are the normal dangly type. I just scribed around the lenses and cut out with a jigsaw.
Mine were £2.99 each from a motor spares shop. There's no fancy surround with them though as they are the normal dangly type. I just scribed around the lenses and cut out with a jigsaw.
Second thought's on this, i want to get some of them rear bars so i'll wait and see how they fit and may fit foggies to them instead of the bumper, More shiney stuff to polish
I was thinking of doing this,and liking things to be even was gonna put two on, i know if you got one it has to be on the offside, but if you fit two can they both be lit? whats the law on this?
As far as I remember, (dregged through the regs when I fitted mine underneath
the chassis), you can have a maximum of two, evenly spaced from both sides.
If two are fitted, both have to be working.
As far as I remember, (dregged through the regs when I fitted mine underneath
the chassis), you can have a maximum of two, evenly spaced from both sides.
If two are fitted, both have to be working.
You'll do for me Tommy (i mean Matt) Looks much better with two i think, also looking about for some extra tail light's for the top of the roof,
Comment