rear passenger window

[blacky]

does anyone know how to get the rear passenger door panel off.taken screws out of arm rest,one from door catch and released panel from fasteners.it seems to be held on by the door catch and i cant see anything else to release.need it off to get window out to refit seal and rail that holds window to winding mechanism.

[safysurfer]

door lock

slide it forward or back , it has four hooks that lock into the door .so just slide it one way or the other, and dont break it like i did then find out it slides

[nero279]

Pretty sure it's forwards, will confirm when i next go for a ciggy though as mine's off at the mo.

[Gazbo]

It will be forwards and then carefully unclip the rod from the handle

[laser_jock99]

Not sure if this helps:

http://www.hboss.net/4runner/door-panel-removal.htm

I used it to assist removal of front door panel.

[nero279]

Yeah, slide it forwards. I left the handle attached to the rod, and just turned the doorcard through 90 degrees, slid the handle back through the hole in the doorcard, then clipped the handle back onto the door.

[StevenN]

Door Card

Yep

after removing the central screw you need to slide the handle forwards. It might help if you use a thin but wide flat piece of metal as a lever.

regards

Steve