yobit eobot.com

Announcement

Collapse
No announcement yet.

Rear springs and torsion bars

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rear springs and torsion bars

    Managed to do the rear springs and adjusted the torsion bar today.
    How far can you wind the torsion bars as the drivers side at the front is
    1/2 inch lower than the passenger side. Does anyone know how many turns to lift it 1/2 inch.
    Heres a before and after pic.
    Attached Files
    Last edited by Taliesins; 25 May 2006, 19:58.
    Trust your Hound.

  • #2
    Which springs did you use??
    Rob

    Still working for the man!

    Comment


    • #3
      Originally posted by Taliesins
      Managed to do the rear springs and adjusted the torsion bar today.
      How far can you wind the torsion bars as the drivers side at the front is
      1/2 inch lower than the passenger side. Does anyone know how many turns to lift it 1/2 inch.
      Heres a before and after pic.
      i think you can get upto 1 1/2" on the torsion bars.

      i had the same thing on my old 2.4 so just adjusted each side up/down till it was level
      https://www.facebook.com/groups/henpals/

      Comment


      • #4
        WOW taliesins those springs make your truck look shinier
        Only Toyota can get you out of shite

        Comment


        • #5
          So the hilux has an adjustable tosion bar? Like the peugeots set up? Would adjusting it make it more prone to snap?
          What comes around goes around!!

          Comment


          • #6
            Originally posted by Gazbo
            Like the peugeots set up?
            You mean absolutely rusted to the point it's impossible to adjust?! LOL
            Real trucks don't have spark plugs

            Comment


            • #7
              Originally posted by Taliesins
              Managed to do the rear springs and adjusted the torsion bar today.
              How far can you wind the torsion bars as the drivers side at the front is
              1/2 inch lower than the passenger side. Does anyone know how many turns to lift it 1/2 inch.
              Heres a before and after pic.


              Some info here...

              http://www.off-road.com/toyota/tech/torsion/index.htm

              Comment


              • #8
                just seen this surf today in Pwllheli
                i wont show the front coz of the plate
                Last edited by mud skipper; 28 March 2008, 14:26.
                Surf.gone but not forgottendisco now gone aswell

                Comment


                • #9
                  sorry about the gezzer in my pasenger seat . . . . .hes a landy freak
                  Surf.gone but not forgottendisco now gone aswell

                  Comment


                  • #10
                    That's a big body lift
                    www.daemon4x4.org

                    Comment


                    • #11
                      I reckon there's no engine in it!

                      Comment


                      • #12
                        Does he have to reach through a hole in the floor to put it in gear?
                        =========
                        =SOLD UP!=
                        =========

                        Comment


                        • #13
                          Snoop, lol, they are the worst cars i have ever worked on!!
                          What comes around goes around!!

                          Comment

                          Working...
                          X