world epicentre

[mud skipper]

i today must have come accross the world epicentre of surfdom
while out doing my job today i saw no less than 18 surf's on my journey inbetween blaenau ffestiniog and barmouth
the thing that gets me none of them must have computer's as i have not seen any on here or on my site, if they are here sign up and help fly the draig goch(welsh dragon)
john

[BUSHWHACKER]

Better get some calling cards printed off John.

http://www.yotasurf.co.uk/forums/att...achmentid=8774

[mud skipper]

Better get some calling cards printed off John.

http://www.yotasurf.co.uk/forums/att...achmentid=8774

i was thinking of that, a double sided water proof type one.
vince are your roof bars off an estate car just bolted on, as i was considering something along the lines of an astra van/estate bars from a s****py and bolting them on from the inside.

[BUSHWHACKER]

No, I used a good de-greasing solution and 'blu tac'


hehehe sorry. Yes mine are bolted through from in inside. I measured about five times before taking a drill to the roof though
The bars had rubber gaskets but I squirted a ring of silicone aroud each hole as well, and I used 40mm ally washers in side with spring washers on top of them. The bars are really secure 'cos I can use them to haul myself up to polish the roof.
Oh and they're from a Peugeot 406 estate, Escort bars are the same too.

[mud skipper]

No, I used a good de-greasing solution and 'blu tac'


hehehe sorry. Yes mine are bolted through from in inside. I measured about five times before taking a drill to the roof though
The bars had rubber gaskets but I squirted a ring of silicone aroud each hole as well, and I used 40mm ally washers in side with spring washers on top of them. The bars are really secure 'cos I can use them to haul myself up to polish the roof.
Oh and they're from a Peugeot 406 estate, Escort bars are the same too.

i now how that feels i used to install handsfree car kits into cars, and when i did the roof mounted aerials on merc's i would measure them at least half a dozen times, i once drilled into the box section on a pug estate roof that was fun getting out of that one, i had to get a body shop guy to cut a big hole in the box section, the car was brand new it didn't even have a reg plate on it. several pant changes were needed before i owned up to what i had done........

[BUSHWHACKER]

That's why I measured a few times, 'cos my truck has a sunroof and there are what seem to be extra strengthening struts on the inside of the roof.