Gen2 Surf engine/body/accessory parts

[Bayside]

It’s that time again - I need to sell some parts to inject some cash into my project!

KZN130 Diesel parts for sale from 1993 Surf 3.0 SSRX:
Alternator 45.00
Intake hose (no splits) 15.00
All other hoses and lines are available POA
Exhaust downpipe: brand new still in packaging 45.00
Exhaust Centre: No splits or dents 20.00
Tail section: Used for 3 months condition as such 15.00
CT12B Turbo – 2 year old recon unit 100.00
KZTE Diesel pump: No leaks etc 120.00
Air box 25.00
Power steering pump: No leaks 50.00
Two viscous fans - one with fluid modification 40.00 / 50.00

Gearbox and Transfer case have already been sold.

Complete set of Toyota wind deflectors & clips 30.00

Roof / sunroof deflector - toyota with adj intake spoiler 25.00***SOLD***

Prices subject to postage cost but this will be kept to a minimum.

Lots of other engine parts available: pulleys, injectors, glow plugs, cams etc.

Most parts, bolts, sensors and other small parts are on the block and are still perfectly serviceable.

The engine was running very well when removed - the head gasket / casting was on the way out and had just started to pressurize the coolant so no good to anyone but all ancillaries were fine.

I do have various body panels doors etc and glass however these wont be ready just yet. Let me know if you want me to keep anything though and I can earmark it before I sell it off.

I have lots of other parts as well so if you are after something specific drop me a line and I’ll see what I can sort out for you. I’m still sorting what parts can go from the body and running gear whilst I build my other truck but if you ask the worst I’ll say is no.

Can post some pics if required.

[Surf77]

Hello, I'm in looking for good drivers door, rear off side door and off side front bumper/arch molding (the plastic bit on front bumper by wheel arch) all in black?

[budweiser]

im after sunroof deflector!!

any pics?

thanks

[Bayside]

Hello, I'm in looking for good drivers door, rear off side door and off side front bumper/arch molding (the plastic bit on front bumper by wheel arch) all in black?

Ill have a look at the condition of the doors I have. I know a couple had some little marks and a couple had a rust spots (little ones) Ill see what I have and get back to you they are all dark blue.

On the arch is it just the section that mounts to the bumper? I have a couple Ill see whether I have one ready to go or still attached to the breaker.

[Bayside]

im after sunroof deflector!!

any pics?

thanks

Ive attached a pic of the unit as its sits now..... on my lounge floor.

[Surf77]

Ill have a look at the condition of the doors I have. I know a couple had some little marks and a couple had a rust spots (little ones) Ill see what I have and get back to you they are all dark blue.

On the arch is it just the section that mounts to the bumper? I have a couple Ill see whether I have one ready to go or still attached to the breaker.

Thanks for the getting back. I already have a rear door in dark blue in good nick, was hoping if you had black I could do simple change with no respraying. Will still consider drivers door if its in good condition with only surface rust. Yes the arch section that mounts to the bumper, will still be interest in that, just the off side. Do you have the fittings as well could do with some for both sides or any nifty tips on how to fit with out?

[Bayside]

Thanks for the getting back. I already have a rear door in dark blue in good nick, was hoping if you had black I could do simple change with no respraying. Will still consider drivers door if its in good condition with only surface rust. Yes the arch section that mounts to the bumper, will still be interest in that, just the off side. Do you have the fittings as well could do with some for both sides or any nifty tips on how to fit with out?

Ok I have three drivers doors at the moment one for my project and two others Ill see what they are like as at the yard later this evening. If the best door is on my breaker its kind of being used as a storage unit whilst I build stuff so need it to stay on in the short term but might good for you after that. I have another one there if thats good Ill part with that one

Do you need the complete door including all internals etc? Only reason I ask is I will probably remove the window motor and switch gear from it if better than mine. Ill get back to you and we can sort the details, price etc.

[Rob5464]

I am interested in the door deflectors. What is the condition? They will need posting.

[Bayside]

I am interested in the door deflectors. What is the condition? They will need posting.

Very good condition - just need a wipe over, they have no cracks or scratches. There are a couple of light rub marks but these will come out with some polish and are not obvious to look at and they havent damaged the plastic.

The only reason they are being sold is that the breaker I bought had a brand new set on it otherwise a really nice set and I would have reused them.

[Surf77]

Ok I have three drivers doors at the moment one for my project and two others Ill see what they are like as at the yard later this evening. If the best door is on my breaker its kind of being used as a storage unit whilst I build stuff so need it to stay on in the short term but might good for you after that. I have another one there if thats good Ill part with that one

Do you need the complete door including all internals etc? Only reason I ask is I will probably remove the window motor and switch gear from it if better than mine. Ill get back to you and we can sort the details, price etc.

Ok thats great, I am in no hurry for the door so what ever suits, and no I don't need any of the internals from the door in fact the less on it the better in some ways, less to take off for the respray .

[Bayside]

Had a mare at the yard fighting a clio wheel bearing tonight so didnt have a chance to sort much - daily transport needed fixing and all! so will be back up there Friday morning to see what shells are best. Im sure at least two of them are really good Ill try to get a pic for you.

[Rob5464]

Very good condition - just need a wipe over, they have no cracks or scratches. There are a couple of light rub marks but these will come out with some polish and are not obvious to look at and they havent damaged the plastic.

The only reason they are being sold is that the breaker I bought had a brand new set on it otherwise a really nice set and I would have reused them.

I will get back to you, I am going to see what is going on with the engine tomorrow. Need to get it running right before I buy more shinny bits

[Bayside]

I will get back to you, I am going to see what is going on with the engine tomorrow. Need to get it running right before I buy more shinny bits

Ok let me know

[Surf77]

Had a mare at the yard fighting a clio wheel bearing tonight so didnt have a chance to sort much - daily transport needed fixing and all! so will be back up there Friday morning to see what shells are best. Im sure at least two of them are really good Ill try to get a pic for you.

ok thanks.

[Bayside]

Took photos of the door for you..... then realised Id taken a picture of the wrong door!!! DOH! Ill sort some out asap for you. The drivers door on the breaker is rusty as a rusty thing so will be down to the one off my old truck - off which I took a pic of the passenger one!