yobit eobot.com

Announcement

Collapse
No announcement yet.

2nd gen auto/manual bits, wind deflectors etc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2nd gen auto/manual bits, wind deflectors etc

    Hi

    Garage clearout time and swapped my 2nd gen auto to manual,
    so i have..

    set of four 2nd gen wind deflectors.
    good condition. black edging with toyota printed in white on the front ones.
    all clips in place. (one of the attaching rivetts has lost its black plastic cap on the inside).

    auto box
    auto props F+R
    auto flywheel/starter ring gear

    a hilux pickup MK I/II/III front prop. compressed length 61 cm.
    no discernable play in double cardan joint or u.j.

    with the manual box i got a dual mass flywheel supplied as in good condition. (and clutch,2mm max left, and pressure plate).
    (i went with a solid flywheel and new clutch kit).

    set of four standard surf 2nd gen 6 spoke alloys. (and a set of alloy nuts).

    i can e-mail pictures of any of above, or any questions, just ask.

    my e-mail is lurkalot007@yahoo.co.uk
    mobile 07840 653 852 (texts most reliable)

    i'm in kent.

    Sim

  • #2
    hi do you still have the wind deflectors? many thanks tim

    Comment


    • #3
      set of four standard surf 2nd gen 6 spoke alloys. (and a set of alloy nuts).
      If you mean the standard 6 spoke 16" alloys as below, then I might be interested
      Last edited by spacast; 15 February 2011, 23:00.

      Comment


      • #4
        deflectors and rims

        Hi

        sorry, i've been away for a few days without internet access.

        yes i still have the wind deflectors. i can e-mail you a pic if you like.
        (not quite sure how to put pictures on here yet).

        the rims are an older style than the ones in your picture.
        i've seen the same type on some mitsubishi's or similar.
        6 equal sized spokes with rounded shaped cut outs. standard issue on many 2nd gen surfs. standard width. 6 inch?.
        i'll go measure and photograph if anyone wants.

        Sim.

        Comment


        • #5
          Originally posted by spacast View Post
          If you mean the standard 6 spoke 16" alloys as below, then I might be interested
          These are 3rd gen wheels so 2nd gen wheels won't fit the 3rd gen
          https://www.facebook.com/groups/henpals/

          Comment


          • #6
            Originally posted by stormforce View Post
            These are 3rd gen wheels so 2nd gen wheels won't fit the 3rd gen
            Yep, but I have a 4runner (Gen2), and fancy some Gen3 wheels, and from advice here I understand Gen 3 fit Gen2 (but not the other way round)
            When he said "6 spoke" I thought he might mean the ones I wanted, but they are not, and I can't think what they are like ATM.

            Comment

            Working...
            X