yobit eobot.com

Announcement

Collapse
No announcement yet.

Green over silver 3.0l now breaking

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Do you still have the gearbox and will it fit my 1996 3ltr surf.

    Comment


    • #47
      Sorry the gearbox is sold
      https://www.facebook.com/groups/henpals/

      Comment


      • #48
        Hi,

        My surf won't start due to not starting .... I could tell by the fact that it wouldn't move It was minus 4C so I guess the batteries just sulked. I know I can put them on charge, and the alternator seems to be charging ok according to dials when running, but ..... I looked at the batteries and there is a sticker that says "2004" - I guess this might be a clue to their age.

        Another thing, when I do turn on the ignition, the little red coil sign flashes out almost as fast as I blink ....

        And yet another thing, I went to pull up the pulling thing to bring the nearside rear seat flat only no pulling thing in evidence! Seems that there is metal rod with a threaded end, so...

        The model is Y-KZN130W-GKPQT

        So, have you got any bits that might be of use? I can buy online a pair of batteries for about £65 each but have not inquired as to whether they can be got handed (if the applies) .....Before spending money, thought I'd see if you got anything.

        I'm having the beast serviced on Monday so stand bu for more requests

        Comment


        • #49
          Originally posted by Pelicanbill View Post
          Hi,

          My surf won't start due to not starting .... I could tell by the fact that it wouldn't move It was minus 4C so I guess the batteries just sulked. I know I can put them on charge, and the alternator seems to be charging ok according to dials when running, but ..... I looked at the batteries and there is a sticker that says "2004" - I guess this might be a clue to their age.

          Another thing, when I do turn on the ignition, the little red coil sign flashes out almost as fast as I blink ....

          And yet another thing, I went to pull up the pulling thing to bring the nearside rear seat flat only no pulling thing in evidence! Seems that there is metal rod with a threaded end, so...

          The model is Y-KZN130W-GKPQT

          So, have you got any bits that might be of use? I can buy online a pair of batteries for about £65 each but have not inquired as to whether they can be got handed (if the applies) .....Before spending money, thought I'd see if you got anything.

          I'm having the beast serviced on Monday so stand bu for more requests
          the glow plug light your on about will only flash few a split second.Leave the ignition on and count to 10 or until you hear a relay click on the n/s inner wing.This will indicate the glowplugs are up to temp then start the truck.You may find that the glowplugs are knackered and you will need to get some new ones as this seems to be the problem this year with alot of trucks including mine.
          I will have a look at the passenger seat i got here to see if that lever actually comes off or if yours is broken.Once you get the truck started get the batteries checked before buying new ones as it could be the alternator not charging properly.Also check the belts that they are at the right tension as this will prevent the batteries charging properly.
          As you say the truck is going for a service so they should check everything anyway but ask them to check the batteries anyway.
          Just give me a shout if i can help
          https://www.facebook.com/groups/henpals/

          Comment


          • #50
            Mornin Rich any luck getting the rear deflectors and the bracket off?

            Pelicanbill
            To test to make sure the alt is working right you should get 13.5 - 14.5v across with the engine running...worth a go as Rich said before forking out for batteries
            The sh$t gets deeper ...but still swimming

            Comment


            • #51
              Hi Rob.I got everything here now ready to post for you.They will be sent either today or tomorrow at the latest.Would of been done before but cause of the birds etc this week i got put behind a bit but all on track now.
              Cheers Rich
              https://www.facebook.com/groups/henpals/

              Comment


              • #52
                Originally posted by stormforce View Post
                Hi Rob.I got everything here now ready to post for you.They will be sent either today or tomorrow at the latest.Would of been done before but cause of the birds etc this week i got put behind a bit but all on track now.
                Cheers Rich
                Thanks Richard & no problem completely understand by the way dont suppose you have come across any uprated headlight looms at all?

                Rob
                The sh$t gets deeper ...but still swimming

                Comment


                • #53
                  Thanks very much about info re the glow plugs, will be counting on you for more no doubt .... will be in touch

                  Comment


                  • #54
                    transfer box actuator

                    Hi I need transfer shaft actuator asssembly for a 3rd gen 3.0L auto diesel - any chance you might have one?. thanks

                    Comment


                    • #55
                      wind deflectors

                      Hi have you a passenger side front Wind deflector for 2 gen 30 litre mreg if I need to I will buy a pair thanks Mark toyota888

                      Comment


                      • #56
                        wind deflectors

                        Hi have you a passenger side front Wind deflector for 2 gen 30 litre mreg if I need to I will buy a pair thanks Mark toyota888

                        Comment


                        • #57
                          KZN130 rear propshaft with universal joint for 3 litre needed

                          Originally posted by stormforce View Post
                          All parts available.has a blown head tho.Engine and gearbox are fine as i drove the truck most of the way home from Southampton..
                          4 near new 31x10.50x15 general grabber at's £150.. Provisionally Sold
                          ecu £120
                          window motors £25 each
                          starter motor £60
                          alternator £60
                          fuel pump £100
                          turbo £100
                          gearbox £120
                          bottom end engine £150
                          doors £40 each
                          tailgate £50 complete £25 bare
                          Near new tailgate mech and motor with reciept of purchase £55
                          front diff £100 sold
                          driveshafts £30 each
                          spoiler £75
                          front bumper x 2 £100 each
                          rear centre bumper £35
                          wind deflectors £60 set
                          exhaust £100
                          amps and sub woofer £150
                          I am open to sensible offers on all parts

                          All parts subject to delivery charges

                          Please reply here or pm or email at stormforce1067@sky.com or ring 07974183876
                          for prices and other parts not lested
                          Hi
                          I need a 3 litre auto box reap prop shaft with the Universal joint please, postage to Lymm Cheshire...regards Daz

                          Comment


                          • #58
                            Do you have a bottom end available per chance? Ta.

                            Comment


                            • #59
                              Originally posted by daz4565 View Post
                              Hi
                              I need a 3 litre auto box reap prop shaft with the Universal joint please, postage to Lymm Cheshire...regards Daz
                              got one here Daz give me a ring 07974183876
                              https://www.facebook.com/groups/henpals/

                              Comment


                              • #60
                                Parts

                                Would you have the offside rear plastic sill panel (grey plastic carpet to door seal cover on the floor of rear side door area (at bottom of B pillar!))?
                                The rear cup holder?
                                The front ash tray?

                                Can I just confirm this is also a 3rd generation?

                                Thanks

                                Comment

                                Working...
                                X