1991 2.4 2nd gen

[BioHazard]

No one want any bits ? Going to have to throw the vehicle out nearly complete at this rate !!

i know that feeling Rick ......no one wants mine either and the plan was to fund the first gen from it

[nero279]

what's the drivers side rear door like rick? and which decal style is fitted?

[YoungOffroader]

Hey BioHazzard advised me your breaking this truck fairly near to me, im after a windscreen after having mine bricked, do you have one available and if so how much? Cheerz, Joe

[Vagrant No2]

Not sure what you have left but I'm after the two runners that attach to the bottom of the rear window and connect to the big arm bits of the main unit. Mine have rusted to bits so there's no way that the arms can slide along them. Would you happen to have those for sale? (can send you a picture if my description is rubbish).

Also I need a set/section of the metal fuel lines that have rusted to bits on the underside of the truck. Not too sure how complicated replacing these lines will be but I know that I need the parts, as they're about to rust through......

SO if you have these bits could you let me know?

CHeers

Jon

Hi Jon
I have the window assembley you need.
I would buy new fuel lines in my opinion , just for saftey sake . Any decent motor factor will source you an equal eqivilent type of pipe to use .

i know that feeling Rick ......no one wants mine either and the plan was to fund the first gen from it

Just a shame to throw out good parts .

what's the drivers side rear door like rick? and which decal style is fitted?

Will check condition for you.

Hey BioHazzard advised me your breaking this truck fairly near to me, im after a windscreen after having mine bricked, do you have one available and if so how much? Cheerz, Joe

I do have a screen for you , but best we try and remove it together as dont want to break it . It is bonded in so may need some cheese wire to cut it out.

[YoungOffroader]

Windscreen

well im not too far away but the problems are i only really have friday afternoon from 2pm and saturday from 2pm free atm, im stuck on overtime at work trying to get a little extra money. I tried once with cheese wire but the steel cable kept snapping on the edge of the window, so i gave up and just scrpped that truck a week before my window got bricked. what price will we be looking at?

[Jonboy22]

Fantastic.

Right so how do I go about this (payment and posting and all that malarky) and more consequentially how much do you want for the two runners??

Cheers

JOn

[Vagrant No2]

Fantastic.

Right so how do I go about this (payment and posting and all that malarky) and more consequentially how much do you want for the two runners??

Cheers

JOn

Hi Jon
Those parts new are £25 each , I know as I bought a pair for my 1st gen . £15 the pair + P&P. Paypal rickandtam@btinternet.com but dont send money until I have removed the parts .

Rick

[Jonboy22]

Hi Jon
Those parts new are £25 each , I know as I bought a pair for my 1st gen . £15 the pair + P&P. Paypal rickandtam@btinternet.com but dont send money until I have removed the parts .

Rick

AH right ok, well £15 is a very fair deal so I'm fine with that.....

Is it a tricky job getting them on/off ? Mine are a but crusty but I was hoping it was just a case of sliding/clipping it off the window, and detaching the main roller arm bits.....?

[BioHazard]

Just a shame to throw out good parts .

i'm stripping it out now and storing the parts in the garage and looking at the parts wanted thread

[YoungOffroader]

well im not too far away but the problems are i only really have friday afternoon from 2pm and saturday from 2pm free atm, im stuck on overtime at work trying to get a little extra money. I tried once with cheese wire but the steel cable kept snapping on the edge of the window, so i gave up and just scrpped that truck a week before my window got bricked. what price will we be looking at?

Just in case ya dint see it. Cheerz

[Vagrant No2]

Just in case ya dint see it. Cheerz

This weekend is going to be a little tricky to do anything . I am usually home from 4-00 most week days but not this Friday , and going to be very busy Sat and Sun , sorry .
Price will be £40 for the screen .

[Vagrant No2]

AH right ok, well £15 is a very fair deal so I'm fine with that.....

Is it a tricky job getting them on/off ? Mine are a but crusty but I was hoping it was just a case of sliding/clipping it off the window, and detaching the main roller arm bits.....?

Jon , I have removed the runners for you . See the attached pic to see the condition . The rust is only surface with minor pitting . The rubbers are OK aswell . Just rub them down and give them a coat of Hammerite or similar.

[YoungOffroader]

This weekend is going to be a little tricky to do anything . I am usually home from 4-00 most week days but not this Friday , and going to be very busy Sat and Sun , sorry .
Price will be £40 for the screen .

Yer its ok bout being busy this week, ive now been ordered by the parents that ive gotta help them on friday and saturday im now on a late shift but the week after i shall see when i am free. a mate of mine has a cutting tool for cutting the adhesive out of windscreens aswell but everytime hes tried to use it hes broke the window so i may get dat off him and get some practive on so scrap cars i have here.

[Jonboy22]

Jon , I have removed the runners for you . See the attached pic to see the condition . The rust is only surface with minor pitting . The rubbers are OK aswell . Just rub them down and give them a coat of Hammerite or similar.

Well they're significanlt less rusty than mine, at least they are recognisable as runners....

Right so how much do I need to pay pal you?

[FLORIDA747]

HI, what colour is the vehicle and what are the front wings like? is it 2 door or 4? does it have inertia rear belts?