3"S/Steel exhaust

[darkdezigns]

Cheer's rich i'll keep that in mind, i'll have a quick look re the lexus ones but if the're too expensive/cheap looking, i'll give you a shout, maybe give em the BDT treatment

hey hey my chavness is spreading!

[stormforce]

pick them up when your down Ian and pay whenever mate.See you soon

[POPEYE]

No, don't do it Ian. The one thing you can do to 'cheapen' the look of the rear end of a Surf is to fit those horrid 'Lexus style' light clusters. They only look half decent on white or silver cars, not manly trucks!


Rear light clusters should be either tinted or all red for a neater look. (thats my opinion anyway and I'm entitled to it so there.)

It's ok i aint going for them now, it'll be Richards with a laquer of some sort,

[BUSHWHACKER]

Yeah! they do look nice mate but i need some with rev lights in and i do like the look of the lexus type, plus some s/s covers

No, don't do it Ian. The one thing you can do to 'cheapen' the look of the rear end of a Surf is to fit those horrid 'Lexus style' light clusters. They only look half decent on white or silver cars, not manly trucks!


Rear light clusters should be either tinted or all red for a neater look. (thats my opinion anyway and I'm entitled to it so there.)

[POPEYE]

thats ok Ian just give a shout.Where you staying when you come down on your hols and perhaps meet up one day/evening

I keep meaning to get the address/location of the camp Rich so i can see how close it is to you, if it's not to far maybe i can pop over, i think i still have your phone no so i can call you first, my brother in law reccomended cambourne as being very nice, he worked there, i'll phone the son in law when he gets home and get the address,

re the lights, i had a quick look on eblag and they dont seem to do the lexus type for 2nd gens plus bl00dy expensive, so it'll be the standard ones i think, may have to wait till after the hols moneywise or perhaps pick em up and pay ya for em when i visit, see how it goes!

[stormforce]

thats ok Ian just give a shout.Where you staying when you come down on your hols and perhaps meet up one day/evening

[POPEYE]

i have a set of tail lights here Ian if you need them with the rev lights in them.

Cheer's rich i'll keep that in mind, i'll have a quick look re the lexus ones but if the're too expensive/cheap looking, i'll give you a shout, maybe give em the BDT treatment

[darkdezigns]

Yeah! they do look nice mate but i need some with rev lights in and i do like the look of the lexus type, plus some s/s covers

these have the reverse lights!lol,but u cant see them,and these were a richard special too!

[stormforce]

i have a set of tail lights here Ian if you need them with the rev lights in them.

[POPEYE]

Yeah! they do look nice mate but i need some with rev lights in and i do like the look of the lexus type, plus some s/s covers

[darkdezigns]

Well thanks Vince, appreciate that, yup i do need to change em, i've been thinking about the lexus type replacement but i seem to remember some were a bit dodgy, i'll have to have a search on that subject, i have hooked up the small spots on top to the rev lights so i've at least some rev lights working, wired em via a DTDP toggle so i can switch em off, switch em on or have em working on reverse,

ian just tint the factory ones?

[Diezel Weazel]

Can't forthelifeofme remember where, when I acquired em Ian !!! sorry.....

There's always a Payback .... Ya just never ever see it Comin !!!!

[POPEYE]

He He He,
Got 4 spare, when I get round to finishing the refurb job I'll put em on me Truck

There's always a Payback .... Ya just never ever see it Comin !!!!

Wherejagetemfromthen?????? was it the same bloke with the tatty silver ones who was thinking of selling em and who we were goin to go half each on???? ya smoothed in there slicker than snot on a door nob, they'll look nice "done" up jess,

[Diezel Weazel]

Hi mate, i think the wheels are fairly rare over here, their crag country raceing gear made by "W" Works in japan, a bloke on here had some which were silver (and tatty! his description, not mine,) and i've seen a Paj round here with some red ones, their a nice wheel i think, i got these off ebay a while back, the rims needed a bit of a clean up and i was able to switch the rims round to give a deepdish look, the centers were in good condiction tho, i've been trying to find another one as a spare but no luck so far

He He He,
Got 4 spare, when I get round to finishing the refurb job I'll put em on me Truck

There's always a Payback .... Ya just never ever see it Comin !!!!

[POPEYE]

speaking of wheels, where did ya get those? cause they look identical to mine only mine are black instead of red... have never actually seen any other vehicle with them, let alone a surf...

also, that square red thing that sticks out past ya rear bar, where ya would normaly have a towball... that looks like it sticks out heaps, does it get caught up much offroad??

Hi mate, i think the wheels are fairly rare over here, their crag country raceing gear made by "W" Works in japan, a bloke on here had some which were silver (and tatty! his description, not mine,) and i've seen a Paj round here with some red ones, their a nice wheel i think, i got these off ebay a while back, the rims needed a bit of a clean up and i was able to switch the rims round to give a deepdish look, the centers were in good condiction tho, i've been trying to find another one as a spare but no luck so far, hence the spoked mad blade spare i got on the back, red center so it dont look too out of place, (switched the rims on that to)

the red bit on the back is for a tow hitch, just aint got round to getting one yet, and have'nt done any offroading, but i guess it would "dig" in a bit, it's at it's extream fitting to clear the tube bumper but i'll still have to spacer the hitch (adjustable) to clear the tube

Got ya email regarding snorkels, all my surf pics are in the link below i'll email you the password,
i aint finished the snorkels yet, need tops and hose to air box, they were made from combi boiler inner flue, about 2 1/4" alloy tube, the n/s is tight on the aeriel but it goes, just alter the bracket at the bottom of the aeriel, ya need to remove the wing (s) and cut some of the doubleskinning away, (do a search on surfinstien's snorkel, thats where i got the idea from)
cheers ian

http://s63.photobucket.com/albums/h1..._tab_my_albums