Say hello to my little friend!

[DMAudio]

Nice! I pinched a lot of useful info from this thread.

[budweiser]

Just to follow this build with different owner,
It changed colour and other bits

[budweiser]

All strapped

after a while, a friend(R.I.P.) of mine got to enjoy this Lexurf
now I inherited it,
it's not working, like it starts and after few seconds it turn off, I can see the oil pressure is too low in idle,
I hope with a bit of Tlc it will be back to its driving days.

[budweiser]

ooooh...

Cheers

its a start!

[Karma Supra]

http://www.elatemfg.com/product/elat...arger-manifold

ooooh...

Cheers

[budweiser]

I'm temped with the Tundra TRD supercharger... bolts right onto the VVTi..

I just can't be bothered to mess bout with management. and it seems a lot of effort for the 6psi max I'd run on it

http://www.elatemfg.com/product/elat...arger-manifold

[budweiser]

that will be nice to see it on a 3dr gen

[Karma Supra]

I'm temped with the Tundra TRD supercharger... bolts right onto the VVTi..

I just can't be bothered to mess bout with management. and it seems a lot of effort for the 6psi max I'd run on it

[budweiser]

hey ZEM_41 are you number 309?

[BUSHWHACKER]

Depends on what cc the Merc engine is, if it's less than 4 litre then the supercharger wouldn't do anything really.

You can get a Mustang Cobra S/C (M112) from the States for around £250 including the throttle body and bypass valve. Plus you'll need larger cc injectors.

A custom inlet manifold would have to be made whatever S/C you use. Some 1/4" aluminium plate and a TIG welder is all you need.

[zem_41]

Hi all
Hi vince :-)
I'm seriously considering an upgrade to a charger.
I'm just wondering about cost
Someone mentioned I could acquire a mercedes 180 supercharger for around £500, would there be any benefit in one of these or is it not worth the hassle? as in reliability or actually fitting it on.
Is there a big difference in the mercedes one and the ford one in one of your previous threads I read, as that one with the kit is $5000.
All comments much appreciated

[zem_41]

All sorted
The reluctor wheel had somehow moved along the shaft slightly, all grubs were still tight though.
Thanks Vince

[zem_41]

Cheers buddy

[BUSHWHACKER]

Just a quick one please Vince
Do you remember what the best gap is for the sensor and the prong thing?
Thanks

2mm is best.

[zem_41]

Just a quick one please Vince
Do you remember what the best gap is for the sensor and the prong thing?
Thanks