That looks amazing, the more I see these pics the more I want one.
I realise there are a lot of factors to consider but say you had all the equipment to do the conversion, how quickly could it be done?
The reason I ask is that at present I can't afford to take it to Wales for the vip treatment but am keen to try it myself and the surf is my only car so need some idea of how long it would be off the road. I have access to a neighbours garage with pit engine hoist etc.
Cheers
Paul
Announcement
Collapse
No announcement yet.
Lexurf VII
Collapse
X
-
Good work Gary, hard to imagine you can improve on Vinces
work, looks like you've managed it.
Leave a comment:
-
Couple more tweeks to the cooling side of things. I had a couple of coolant leaks from various hoses. First one was from the fan switch capillary which enters the coolant hose on the engine side (it's underneath so not visible).
CBS recommend some PTFE tape around the capillary for a better seal or alternatively buy & fit one of their brass unions and sender housings. So that's what I did.
Before.
After.

Next I replaced the heater hoses for silicone jobbies as this was the site for another leak. They usually seal more easily and look a bit better too.
Also, Vince had left me the option to reinstate my rear heater if I wanted and as everything was in good condition including the pair of small metal pipes I thought why not. I've always used it in the past anyway.
Just a couple of tee pieces needed (19mm to 8mm) from CBS plus silicone hoses and it was back in business.
Nice and warm too (after I got rid of the f**king airlock
).


Before.

After.

Also added some hose end fittings to tidy up the fuel & breather lines.
Leave a comment:
-
-
Cheers my man
Pics don't do it justice to be honest. Hopefully when the Recaro seats go back in the two will look smart together.
Leave a comment:
-
After removing the seats for bolster repairs and cleaning I decided to whip the carpets out and give them a clean & dye. After seeing the job Vince done here I thought I'd give it a go.
Small shot of the grubby, offensive item.

Main carpet stripped out, cleaned & dried.

I sprayed all this indoors and used a blow heater to dry between coats to get the job done quick. This dye is some toxic shit so if you use it indoors or in a confined area be sure to wear a good quality respirator! The wife walked in on me whilst I was spraying and coupled with the heat of the place she started choking and spluttering thinking she was going to pass out. She wasn't to happy that I was holding her hand and trying to explain my dying love for her hehe.
Notice the difference in the colours below. Wheel arch liners have been washed and resembling something of their original colour. Boot carpet below it is stinking and the tailgate door liner has been cleaned up & dyed.
I am using the black upholstery dye from Valeterspride applied from a small spray bottle. I gave everything three coats and it took the whole 5ltrs. I found that once dried, giving the carpets a rub over with a hard bristle brush sort of activated the fibres again and gave them that 'new' plush feeling back. The carpets felt quite hard and brittle after the dying and this sorted them out.

Main carpet dyed and ready to go back in.

Before, stripped out.

After. With everything being washed and bone dry the inside has a nice 'new' smell again. No more damp after sorting a leak I had plus I also scrubbed the bare floorpan as a previous owner had a dog in the back and occasionally you could still smell it.

Just the small strips of carpet to dye on the bottom of the doors and thats it finished. Will use a brush on these to save a load of masking up.
Seats etc going back in over the weekend. I will add more pics when done.Last edited by GBV8; 10 February 2012, 01:55.
Leave a comment:
-
Hehe, couple of weeks ago a neighbour comes walking down my street and starts telling me how he was sitting watching TV the other night and he hears this almighty rumble. So he jumps up off his seat and bounces out to the front door to see what it is and sees my Surf leaving the street. First he thinks, I thought he (me) sold that (truck was on 'holiday' in Wales) and secondly, it's a diesel engine in it anyway??? What happened was my Bro-in-Law had called by for a gander and to hear it running and I couldn't resist stamping hard on the loud pedal a few times. He then jumped in and we drove off to the off licence for a few beers.Originally posted by flounderbout View Post
the neighbours are going to love you! 
Anyway, the neighbour is a bit of a petrolhead himself so I opened the bonnet and showed him and he's like, "WTF!!"
He then comments that he didn't think I was into this sort of thing, modding trucks, off road etc.
I said, "I'm not and I know it's all totally unnecessary but by f*ck it's shit loads of fun!"
Yeah, wait until he hears the 'Express' coming
Leave a comment:
-
I have often found that's a perfectly justifiable and sound basis on which to do anything.Originally posted by GBV8 View Post
They are Viair Dual 380c compressors. Brand new and boxed.
Plans are for a set of Nathan Airchime K3 train horns and a 5 gallon tank to supply them.
Will also connect up an airline for tyres and blowing dust off my dash
All totally unnecessary and useless but loads of fun. I'll keep the thread updated

Looking forward to the video of the test blast
Leave a comment:
-
That's what I was thinking...Originally posted by gary-r View Postsnigger
the zorst note is usually enough for that
Leave a comment:
-
Originally posted by GBV8 View PostPlans are for a set of Nathan Airchime K3 train horns and a 5 gallon tank to supply them.
Will also connect up an airline for tyres and blowing dust off my dash
All totally unnecessary and useless but loads of fun. I'll keep the thread updated
the neighbours are going to love you!
Leave a comment:

I cant wait to see those babies in action !!!!
Leave a comment: