Ooi Stormy!!!!

[steve s]

andy the truck looks fantastic mate.just about to give mine a 2 ins body lift as the wheels you sold me rub just a little when im driving across fields and pulling land rovers out of the mud at work .is there any probs i might come across when doing the b/lift .growler has the bumper brackets but were can i get the red bracket from .my surf is off the road at the moment as it was written off AGAIN only very minor damage this time in fact i could have done the damage off road and it wouldn't of bothered me .but as its off road i thought id give it its service a good clean up and the b/lift .and then who knows might get to do some off roading or green laning again .although i wouldn't want to follow yours mate .
have you still got the winch?.

[purplebeard66]

suspension lift

nice job man.how much did the whole lift cost you?looks awsome.got me thinkin,if i jacked mine up the girlfriend wouldnt be able to get in,sounds good

[stormforce]

It's lasted three and a half years of Stormforce abuse, which is good to hear.

if it lasted my abuse then it will last Andy's abuse

[evildwarf]

It's lasted three and a half years of Stormforce abuse, which is good to hear.

It was still in pretty good nick when i got it from Rich all i did was clean it up and a fresh coat of paint and away it went

[BUSHWHACKER]

Cough Cough!! Sorry Vince i got it off of Rich who got it off of you nice job by the way it works a treat I could not remember who Rich said had made it because i had a couple of bits off of Rich and got them around the wrong way last time i mentioned one of the parts was made by a forum member if you remember last week's post

It's lasted three and a half years of Stormforce abuse, which is good to hear.

[evildwarf]

It's rich's fault...dunno why yet!

I'm sorry but Rich is a get out of jail card so he get's the blame for every thing or havn't you noticed yet

[gwh200]

It's rich's fault...dunno why yet!

[evildwarf]

Go easy towing trucks on those, they are only lashing down eyes. The holes are a long way down, you'll get a lot of leverage on the chassis joint if yanking something hard.

Get some hooks like on the front to bolt to the chassis.

i will do but yet again i'm waiting on Rich "Bless him" when he drops some other stuff off i'm going to stick my tow bar back and change the angle of it to protect the back Just in case, until i can get a back bumper made up which will be a while

[evildwarf]

Cough Cough!! Sorry Vince i got it off of Rich who got it off of you nice job by the way it works a treat I could not remember who Rich said had made it because i had a couple of bits off of Rich and got them around the wrong way last time i mentioned one of the parts was made by a forum member if you remember last week's post

[TonyN]

Go easy towing trucks on those, they are only lashing down eyes. The holes are a long way down, you'll get a lot of leverage on the chassis joint if yanking something hard.

Get some hooks like on the front to bolt to the chassis.

[BUSHWHACKER]

Blind Luck
I got a panhard rod drop bracket off of Stormy

Really?
http://www.hiluxsurf.co.uk/forums/sh...75&postcount=5

[evildwarf]

And how did you get your panhard rod so perfectly level?

Blind Luck













I got a panhard rod drop bracket off of Stormy

[BUSHWHACKER]

And how did you get your panhard rod so perfectly level?

[evildwarf]

I don't know about major problem's but I did a 3" body lift and I will do a 6" suspension lift yes there are a few mod's to work around but I personally would not class them as major

[lord_flashart]

I'm not running any combo at the moment as Stormy has only given me half the wheel's but in the end it will be 9" lift and 39x14.5x16.5

A lot of people have trouble with 2" suspension and 2" body lift before hitting major problems so, without going into too much detail, how is a 9" lift achievable?