yobit eobot.com

Announcement

Collapse
No announcement yet.

scott-lee's V8

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #91
    thanks,Alex.
    i was a big fan of andy's lexurf, saw it a couple of times.
    if you remember,or can be bothered, next time your underneath it, give us an idea of how many,90,45,and 120 degree bends there are in the exhaust!

    trying to work it out,with squared maths paper, is proving useless, as its only a 2D format
    i get lost past the x-box, and its the up and over the rear diff,to the back,im struggling with!

    Comment


    • #92
      Originally posted by scott-lee View Post
      thanks,Alex.
      i was a big fan of andy's lexurf, saw it a couple of times.
      if you remember,or can be bothered, next time your underneath it, give us an idea of how many,90,45,and 120 degree bends there are in the exhaust!

      trying to work it out,with squared maths paper, is proving useless, as its only a 2D format
      i get lost past the x-box, and its the up and over the rear diff,to the back,im struggling with!
      Buddy, click this link I've taken some pics from start to finish hope it helps http://i1305.photobucket.com/albums/...pshjbsetqa.jpg
      Yes it's a V8, don't you know I'm loco?

      Comment


      • #93
        thanks,alex.
        that really is helpful,mate!
        just pricing the bends up now (gulp!)

        Comment


        • #94
          Originally posted by scott-lee View Post
          thanks,alex.
          that really is helpful,mate!
          just pricing the bends up now (gulp!)
          No worries bud, good luck
          Yes it's a V8, don't you know I'm loco?

          Comment


          • #95
            well,not much done in the last few months,new job taking up most of my spare time,but a few things have happened.got a plan for the engine covers, but not quite there yet.

            also came across these little gems,purely by chance,and couldn't let them go.

            gave them a bit of a refurb,as you do.

            problem is, now the truck is going to need lifting,more.

            Comment


            • #96
              so, i have tracked down this lot, not bad for a oner!

              also got an adjustable panhard with the deal,so well happy.
              rear shocks are being replaced with LC80 shocks,and im putting a small (40mm) set of spring spacers i've made up.on the plus 2'' springs.
              hopefully, clearance on the front will be taken care off, by the ali bumper, if i can ever get the damm thing scratch free, and polished.

              gearbox and transfer mod is still waiting for parts, and access to the engine has been hard with the sheer amount of work that is going on at overfab. but hopefully it will all be ready next month.

              Comment


              • #97
                loving the rims, mine could do with a refurb too
                Yes it's a V8, don't you know I'm loco?

                Comment


                • #98
                  easy enough,alex.
                  couple of £9 polishing kits from toolstation,and an electric drill,jobs a good un.

                  Comment


                  • #99
                    Needs MOOOOOOAAAAAAR Pics!!!!111111
                    More Lift.
                    More Tyres.
                    More Engine.

                    Comment


                    • Originally posted by Karma Supra View Post
                      Needs MOOOOOOAAAAAAR Pics!!!!111111
                      just for charles, refurbed kit.underside,and finally......all spacer's,spring and ball joint,made by me,including body lift.technical and genius assistance,from Overfab UK.

                      Comment


                      • This,however.is going to be a swine to fit!
                        none of the brackets are even close to fitting.
                        this is a job,for the ''mod father''

                        still have to fit the indicators as well.i now have 3 sets of clear ones,and i don't like any off them.may go for the standard surf clear indicators,and recess them.

                        Comment




                        • Comment


                          • Originally posted by scott-lee View Post


                            Looks good Scott, what was it supposed to fit on? It it Aluminium?

                            Comment


                            • Good work Scott. Make it have it!!!
                              Surf if you got a wave. Wave if you got a Surf.™

                              Comment


                              • looking good bud, id like to see our 2 trucks driving down the road, with all the bullbar and v8ing going on people will think its armageddon
                                Yes it's a V8, don't you know I'm loco?

                                Comment

                                Working...
                                X